Macrolux® Solid XL sheets are monolithic polycarbonate sheets with dual UV protection. They are used in all applications where the sheet is exposed to the harmful effects of direct sunlight. The co-extruded protection on both surfaces means cutting is optimized, the possibility of incorrect assembly is reduced to a minimum and lasting stability is ensured when it comes to both optical and mechanical properties. This product’s features make it unique in delivering superior performance in terms of: transparency, impact resistance, mechanical strength, machinability and adaptability to a wide range of solutions, in addition to retaining exceptional chemical and physical stability. Skylights, Glazing, Opening frames, External partitions, Noise barriers, Safety glazing, Parapets, Canopies
Macrolux® Solid XL sheets are monolithic polycarbonate sheets with dual UV protection. They are used in all applications where the sheet is exposed to the harmful effects of direct sunlight. The co-extruded protection on both surfaces means cutting is optimized, the possibility of incorrect assembly is reduced to a minimum and lasting stability is ensured when it comes to both optical and mechanical properties. This product’s features make it unique in delivering superior performance in terms of: transparency, impact resistance, mechanical strength, machinability and adaptability to a wide range of solutions, in addition to retaining exceptional chemical and physical stability.
The system BDL 4W 10 mm is ideal for the construction of flat and curved roofs. It is characterized by the ease and speed of installation thanks to the complete range of accessories supplied (polycarbonate or aluminium snap-on profiles, specific fixing hooks, EPDM closure gaskets, aluminium fixing profiles, and other completion accessories). The 600 mm width allows easy handling of the panel during the stages of installation, while the 4 walls inner structure combines lightness and transparency The frosted finishing allows a good diffusion of light even without the use of opal colours. The panel is coextruded on both sides, giving ultraviolet protection which ensures the durability and weather resistance of the product over time.
The system BDL 7W 16 mm is ideal for the construction of flat and curved roofs. It is characterized by the ease and speed of installation thanks to the complete range of accessories supplied (polycarbonate or aluminium snap-on profiles, specific fixing hooks, EPDM closure gaskets, aluminium fixing profiles, and other completion accessories). The 600 mm width allows easy handling of the panel during the stages of installation, while the 7 walls inner structure combines lightness and transparency. The frosted finishing allows a good diffusion of light even without the use of opal colours. The panel is coextruded on both sides, giving ultraviolet protection which ensures the durability and weather resistance of the product over time.
The system BDL 7W 25 mm is ideal for the construction of flat and curved roofs as well as translucent vertical walls. It is characterized by the ease and speed of installation thanks to the complete range of accessories supplied (polycarbonate or aluminium snap-on profiles, specific fixing hooks, EPDM closure gaskets, aluminium fixing profiles). The 600 mm width allows easy handling of the panel during the stages of installation, while the 7 walls inner structure and the 25 mm thickness guarantee good thermal insulation and load resistance. The frosted finishing allows a good diffusion of light even without the use of opal colours. The panel is coextruded on both sides, giving ultraviolet protection which ensures the durability and weather resistance of the product over time. The possibility of use for both roofs and walls make it an extremely versatile system and suitable for the most innovative design solutions.
Modulit® 520 HC is a polycarbonate system for the production of translucent vertical curtain walls to use in industrial and civil constructions. The system is made by multiwall extruded polycarbonate panels with honeycomb structure, thickness of 20 mm, module width 495 mm and UV protection obtained by co-extrusion on the external side. The system is made by means of panel coupling, provided by “male / female” joints for a perfect fit; perimeter profiles aluminium complete the fixing structure. Easy and economical installation, Modulit® 520 HC allows excellent light transmission, high load resistance and thermal insulation.
Modulit® 338 LP system is a polycarbonate system for the production of translucent vertical curtain walls to use in industrial and civil constructions. The system is made by multiwall extruded polycarbonate panels with 6 wall structure, thickness of 40 mm, module width 338 mm and UV protection obtained by co-extrusion on the external side. The system is made by means of panel coupling, provided by “male / female” joints; perimeter profiles in aluminium, fixing hook and gasket complete the fixing structure. Easy and economical installation, Modulit® 338 LP allows excellent light transmission, high load resistance and thermal insulation.
Modulit® 500 LP system is a polycarbonate system for the production of translucent vertical curtain walls to use in industrial and civil constructions. The system is made by multiwall extruded polycarbonate panels with 6 wall structure, thickness of 40 mm, module width 500 mm and UV protection obtained by co-extrusion on the external side. The system is made by means of panel coupling, provided by “male / female” joints for a perfect fit; perimeter profiles in aluminium complete the fixing structure. Easy and economical installation, Modulit® 500 LP allows excellent light transmission, high load resistance and thermal insulation.
Modulit® 511 LP 40 mm system is a polycarbonate system for the production of translucent vertical curtain walls to use in industrial and civil constructions. The system is made by multiwall extruded polycarbonate panels with 11 walls double-X structure, thickness of 40 mm, module width 490 mm and UV protection obtained by co-extrusion on the external side. The system is made by means of panel coupling, provided by “male / female” joints for a perfect fit; perimeter profiles in aluminium complete the fixing structure. Easy and economical installation, Modulit® 511 LP 40 mm allows excellent light transmission, high load resistance and thermal insulation.
Modulit® 511 LP 50 mm system is a polycarbonate system for the production of translucent vertical curtain walls to use in industrial and civil constructions. The system is made by multiwall extruded polycarbonate panels with 11 walls double-X structure, thickness of 50 mm, module width 500 mm and UV protection obtained by co-extrusion on the external side. The system is made by means of panel coupling, provided by “male / female” joints for a perfect fit; perimeter profiles in aluminium complete the fixing structure. Easy and economical installation, Modulit® 511 LP 50 mm allows excellent light transmission, high load resistance and thermal insulation.
Modulit® 511 LP 55 mm system is a polycarbonate system for the production of translucent vertical curtain walls to use in industrial and civil constructions. The system is made by multiwall extruded polycarbonate panels with 11 walls double-X structure, thickness of 55 mm, module width 495 mm and UV protection obtained by co-extrusion on the external side. The system is made by means of panel coupling, provided by “male / female” joints for a perfect fit; perimeter profiles in aluminium complete the fixing structure. Easy and economical installation, Modulit® 511 LP 55 mm allows excellent light transmission, high load resistance and thermal insulation.
Modulit® 511 LP 60 mm system is a polycarbonate system for the production of translucent vertical curtain walls to use in industrial and civil constructions. The system is made by multiwall extruded polycarbonate panels with 11 walls double-X structure, thickness of 60 mm, module width 495 mm and UV protection obtained by co-extrusion on the external side. The system is made by means of panel coupling, provided by “male / female” joints for a perfect fit; perimeter profiles aluminium complete the fixing structure. Easy and economical installation, Modulit® 511 LP 60 mm allows excellent light transmission, high load resistance and thermal insulation.
Ondatec 177/51/6 mm is a corrugated multiwall panel designed to be used for roofs and vertical walls in industrial buildings. Ondatec panels perfectly match the fibre cement roof panels: this enables the creation of both ridge-to-gutter skylights and spot lights in the middle of pitched roofs, as well as continuous roofs thanks to the perfect possibility of longitudinal and transversal overlapping. The panel can be supplied with a UV-resistant coextruded transparent gasket, able to increase the air and water tightness performance. Ondatec Ondatec 177/51/6 mm can be personalized with optional work processing for special uses (i.e. cutting of side corners).
Ondatec 177/51/6 mm is a corrugated multiwall panel designed to be used for roofs and vertical walls in industrial buildings. Ondatec panels perfectly match the fibre cement roof panels: this enables the creation of both ridge-to-gutter skylights and spot lights in the middle of pitched roofs, as well as continuous roofs thanks to the perfect possibility of longitudinal and transversal overlapping. The panel can be supplied with a UV-resistant coextruded transparent gasket, able to increase the air and water tightness performance. Ondatec Ondatec 177/51/6 mm can be personalized with optional work processing for special uses (i.e. cutting of side corners).
GRECATEC® 2W 112/28/2.5 mm compatible with ALUBEL 28
Grecatec® 2W 2.5 mm is available in different shapes with micro- Multiwall structure of 2.5 mm thick. Full-light roofing, even combined with other products of identical shapes, can be realized. This product can be supplied with heat-sealed ends. Grecatec® 2W 2.5 mm is UV protected in coextrusion.
Grecatec® 112/28/6 mm is a corrugated multiwall panel designed for use in combination with sandwich panels and corrugated metal profiles, where it is necessary to create a single or continuous transparent roof. It can be used in new builds and / or restructured roofing, installing the panels from the ridge to the gutter or in the centre of the slope thanks to the perfect match on all 4 sides (only with metal corrugated sheets with the same shape).
GRECATEC® 3W 250/40/10 mm compatible with ISOLPACK RW1000
Grecatec® 250/40/10 mm RW1000 is a corrugated multiwall panel, designed to be used for roofs and vertical walls in industrial buildings. It is used both in continuous roofing and single skylights (flat and curved) in combination with sandwich panels and corrugated metal profiles in both sheds and vertical curtain walls. The panel can be supplied with UV-resistant transparent coextruded gasket to increase the performance of air and water resistance.
Grecatec® 250/40/25 mm - Single application with sandwich panels
Grecatec® 250/40/25 mm is a corrugated multiwall panel, designed to be used for roofs and vertical walls in industrial buildings. It is used both in continuous roofing and single skylights in combination with sandwich panels and corrugated metal profiles in both sheds and vertical curtain walls. The panel can match various design requirements thanks to the corrugated 6-wall section which gives it a high load resistance. The shape of the overlaps allows side coupling with almost any insulated panel, keeping the fixing distance to 1 m between the panels. The two versions available with different heights of the external ridges have been designed to optimize the option either in combination with sandwich panels or in combination with polycarbonate panels.
Grecatec® 250/80 10 mm is a corrugated multiwall panel designed for use in coverings and / or walls in the construction industry. It is used both in continuous roofing and single skylights in combination with sandwich panels and corrugated metal profiles for both wall shed and vertical curtain walls. Having a thickness of only 10 mm, the shape with a height of 80 mm ensures an excellent load resistance. Also available 12 mm thickness version.
Grecatec® 333/45/16 mm is a corrugated multiwall panel, designed to be used for roofs and vertical walls in industrial buildings. It is used both in continuous flat roofing and single flat skylights in combination with sandwich panels and corrugated metal profiles. The panel can match various design requirements thanks to the corrugated 3-wall section which gives it a high load resistance, and the possibility to vary the width of the lateral overlapping wings (upon request). The shape of the overlaps allows side coupling with almost any insulated panel, keeping the fixing distance to 1 m between the panels.
The Click 16, system used in roofing applications and mainly for “do it yourself” applications, is made of multiwall polycarbonate panels with a 4 wall structure. The standard thickness of 16mm offers high mechanical performance and adaptability for use in various solutions that require the use of materials easy to handle, to install and transport. It is equipped with an integrated gasket, co-extruded upon manufacture, which provides greater protection against water leakage. The product without integrated gaskets is recommended for wall construction.
The Easyroof® 5M 30 mm panel is designed to facilitate the installation of single skylights coupled with the most common sandwich panels. The main features are: the system can fit to most common sandwich panels with variable thickness, the good thermal insulation and light transmission, the possibility to create skylights on long sloping roofs (please consider the necessary expansion spaces), the good load resistance, the 10-year warranty against hail, yellowing and loss of light transmission.
GRECATEC® 2W 250/35/2.5 mm compatible with ISOMETALL 33.250.1000
Grecatec® 2W 2.5 mm is available in different shapes with micro- Multiwall structure of 2.5 mm thick. Full-light roofing, even combined with other products of identical shapes, can be realized. This product can be supplied with heat-sealed ends. Grecatec® 2W 2.5 mm is UV protected in coextrusion.
Grecatec® 250/40/10 mm is a corrugated multiwall panel, designed to be used for roofs and vertical walls in industrial buildings. It is used both in continuous roofing and single skylights (flat and curved) in combination with sandwich panels and corrugated metal profiles in both sheds and vertical curtain walls. The panel can be supplied with UV-resistant transparent coextruded gasket to increase the performance of air and water resistance.
XL
LL
Mindew
Bicolor
Plus
NO-UV
AntiGlare
XL-Plus
Grecatec® 112/28/6 mm is a corrugated multiwall panel designed for use in combination with sandwich panels and corrugated metal profiles, where it is necessary to create a single or continuous transparent roof. It can be used in new builds and / or restructured roofing, installing the panels from the ridge to the gutter or in the centre of the slope thanks to the perfect match on all 4 sides (only with metal corrugated sheets with the same shape).
